HIKVISION DS-A80 Series User Manual

DS-A80&81 Series Storage System User Manual
45
5.2 FC (Optional)
Purpose:
You can add FC disks in your computer.
Before you start:
1. Install fiber Ethernet adapter and fiber Ethernet adapter drive in both storage system and client server.
2. Connect storage system and client server to fiber channel switch with fiber.
Step:
Click SAN in navigation bar and choose FC to enter FC interface.
Figure 5. 7 iSCSI
5.2.1 Enabling FC
Purpose:
Enabling FC in storage system makes it possible for you to add FC disks in computer. To visit FC disk via computer,
storage system and computer should locate in an optical fiber network. You can enable FC service for:
 A specified fiber channel.
 All available fiber channels.
 A specified FC port.
 All available FC ports.
Before you start:
 Install optical fiber card first.
 Create at least one LUN first. For detailed steps, refer to 4.4 LUN (Logical Volume).
Steps:
1. Click Enable FC to enter Enable FC interface.
Figure 5. 8 Enable FC
2. According to actual connection, select Fiber Channel as Fiber Channel0, Fiber Channel1, Fiber Channel2, or

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English