Access Control Terminal·User Manual
38
You can click Status to check the detailed status of the controller, and click
Remote Configuration to configure the settings of the controller.
Editing Device (Basic Information)
Purpose:
After adding the device, some advanced parameters can be configured in the
editing device interface, e.g. downloading hardware parameters, reading
hardware parameters, time synchronizing, configuring access point, etc.
Steps:
1. In the device list, click Edit button to edit the information of the selected
added device.
2. Edit the basic parameters of the device on your demand, which are the
same as the ones when adding the device.
3. (Optional) Check the checkbox of Enable Holiday to enable the holiday
parameters when downloading permissions.
4. Click the Edit button to finish editing.
5. Click the Hardware Parameters Downloading button to download the
updated parameters to the local memory of the device.
To Next Page
Loading...
