HIKVISION DS-K3G501X-R-M-DM55 - 3.2 Install Pedestals

3.2 Install Pedestals
Before You Start
Prepare for the installaon tools, check the device and the
accessories, and clear the installaon base.
Steps
Note
●
The device should be installed on the concrete surface or other
non-ammable surfaces.
●
To prevent stainless steel from rusng due to dirt during
construcon, it is recommended that the protecve lm be
removed
aer the installaon is completed. There may be
residual adhesive at the lm cung posion. It is
recommended to use WD-40 protecve liquid to wipe aer
tearing the lm.
●
The dimension is as follows.
Figure 3-2 Dimension
3