HIKVISION DS-K3G501X-R-M-DM55 - 7.8.1 Control Door Status

event are displayed in this module. You can view the access
details and person details.
Note
For the user with door control permission, the user can enter the
Monitoring module and control the door. Or the icons used for
control will not show. For seng the user permission, refer to
Person Management.
7.8.1 Control Door Status
You can control the status for the door(s), including unlock door,
locking door, remaining the door unlock, remaining the door
locked, remain all unlocked, etc.
Before You Start
●
Add person and assign access authorizaon to designed
person, and person will have the access
authorizaon to the
access points (doors). For details, refer to Person Management
and
Set Access Group to Assign Access Authorizaon to
Persons.
●
Make sure the operaon user has the permission of the access
points (doors).
Steps
1. Click Monitoring to enter the status monitoring page.
2. Select an access point group on the upper-right corner.
Note
For managing the access point group, refer to Group
Management.
The doors in the selected access control group will display.
3. Click a door icon to select a door, or press Ctrl and select
mulple doors.
Note
For Remain All Unlocked and Remain All Locked, ignore this
step.
4. Click the following buons to control the door.
Unlock Door
When the door is locked, unlock it and it will be open for
once.
Aer the open duraon, the door will be closed and
locked again automacally.
Lock Door
When the door is unlocked, lock it and it will be closed. The
person who has the access authorizaon can access the door
with credenals.
Remain Unlocked
The door will be unlocked (no maer closed or open). All the
persons can access the door with no credenals required.
Remain Locked
The door will be closed and locked. No person can access the
door even if he/she has the authorized
credenals, except
the super users.
Remain All Unlocked
53