HIKVISION DS-K3G501X-R-M-DM55 - Other Settings

Figure 6-10 People Counng
2. Enable People Counng.
3. Enable Device Oine People Counng at your actual needs.
Note
Passing Event Recording is reserved.
4. Select Person Stascs Type as Invalid, Passing Detecon or
Authencaon Number.
5. Oponal: Click Clear to clear all the people counng
informaon.
Other Sengs
Set other parameters.
Steps
1. Click
Conguraon → Turnsle Conguraon → Other
Sengs to enter the page.
2. Set Alarm Output Duraon.
Note
The alarm output duraon ranges from 0 s to 3599 s.
3. Drag the block or enter the value to adjust the light board
brightness.
4. Set the alarm buzzer duraon.
5. Enable Memory Mode at your actual needs.
Note
Mulple cards presenng for mulple person passing is
allowable when enabling the memory mode. When the passing
person's number exceeds the card presenng number, or aer
the latest person passing with no other person passing within
the door open duraon, the door will close automacally.
6.
Set Fire Input Type.
27