HIKVISION DS-K3G501X-R-M-DM55 - 7.4 Person Management; 7.4.1 Add Organization; 7.4.2 Configure Basic Information

Note
You can click or to switch the resource display mode to
thumbnail view or to list view.
6. Click Import to import the selected resources to the group.
7.4 Person Management
You can add person informaon to the system for further
operaons such as access control, video intercom, me and
aendance, etc. You can manage the added persons such as
issuing cards to them in a batch,
imporng and exporng person
informaon in a batch, etc.
7.4.1 Add Organizaon
You can add an organizaon and import person informaon to
the
organizaon for eecve management of the persons. You
can also add a surbodinate organizaon for the added one.
Steps
1. Enter Person module.
2. Select a parent
organizaon in the le column and click Add in
the upper-le corner to add an organizaon.
3. Create a name for the added organizaon.
Note
Up to 10 levels of organizaons can be added.
4. Oponal: Perform the following operaon(s).
Edit
Organizaon
Hover the mouse on an added
organizaon and click to edit its name.
Delete
Organizaon
Hover the mouse on an added
organizaon and click to delete it.
Note
●
The lower-level organizaons will be
deleted as well if you delete an
organizaon.
●
Make sure there is no person added
under the
organizaon, or the
organizaon cannot be deleted.
Show Persons
in Sub
Organizaon
Check Show Persons in Sub Organizaon
and select an organizaon to show
persons in its sub organizaons.
7.4.2 Congure Basic Informaon
You can add person to the client one by one and congure the
person's basic informaon such as name, email, phone number,
etc.
Steps
1. Enter Person module.
Note
For the rst me you enter Person module, a window pops up,
and you can set the rules to generate person ID (leers and
numbers supported) when adding person. When geng
38