Figure 6-11 Customize Audio Content
2.
Enable the funcon.
3.
Set the appellaon.
4.
Set the me period when authencaon succeeded.
1) Click Add Time
Duraon.
2) Set the me duraon.
Note
If authencaon is succeeded in the congured me duraon, the device will broadcast the
congured content.
3) Select the voice prompt type.
4) Enter the audio prompt content or select audio le.
Note
You can click + Audio File or Audio File Management to add audio les.
5) Oponal: Repeat substep 1 to 3.
6)
Oponal: Click to delete the congured me duraon.
5.
Set the me duraon when authencaon failed.
1) Click Add Time
Duraon.
2) Set the me duraon.
Note
If authencaon is failed in the congured me duraon, the device will broadcast the
congured content.
DS-K3G501X Series Tripod Turnsle
43