HIKVISION DS-K3G501X-R-M-DM55 - 6.6.15 Customize Audio Content

You can set ngerprint parameters for accessing.
Click Conguraon → Smart → Smart .
Select the Card Reader as Entrance or Exit.
Enable Fingerprint Recognion.
Select Fingerprint Security Level.
Click Save to save the sengs aer the conguraon.
6.6.15 Customize Audio Content
Customize the output audio content when authencaon
succeeded and failed.
Steps
1. Click
Conguraon → Preference → Prompt Schedule .
Figure 6-11 Customize Audio Content
2. Enable the funcon.
3. Set the appellaon.
4. Set the me period when authencaon succeeded.
1) Click Add Time Duraon.
2) Set the me duraon.
Note
If authencaon is succeeded in the congured me
duraon, the device will broadcast the congured content.
3) Select the voice prompt type.
4) Enter the audio prompt content or select audio le.
Note
You can click + Audio File or Audio File Management to add
audio les.
5) Oponal: Repeat substep 1 to 3.
6)
Oponal: Click to delete the congured me duraon.
5. Set the me duraon when authencaon failed.
1) Click Add Time Duraon.
2) Set the me duraon.
Note
If authencaon is failed in the congured me duraon,
the device will broadcast the congured content.
3) Select the voice prompt type.
4) Enter the audio prompt content or select audio le.
29