HIKVISION DS-K3G501X-R-M-DM55 User Manual

●
The selected persons with no card issued in the person group will be displayed in the right
panel.
●
If you do not select the persons with no card issued in a person group, all the added persons
with no card issued will be displayed in the right panel.
3.
Click Batch Issue Cards.
4.
Oponal: Enter key words (name or person ID) in the input box to lter the person(s) that need
issuing cards.
5.
Oponal: Click Sengs to set the card issuing parameters. For details, refer to Issue a Card by
Local Mode.
6.
Click
Inialize to inialize the card enrollment staon or card reader to make it ready for issuing
cards.
7.
Click the Card No. column and enter the card number.
-
Place the card on the card enrollment staon.
-
Swipe the card on the card reader.
-
Manually enter the card number and press the Enter key.
The person(s) in the list will be issued with card(s).
7.4.7 Report Card Loss
If the person lost his/her card, you can report the card loss so that the card's related access
authorizaon will be inacve.
Steps
1.
Enter Person module.
2.
Select the person you want to report card loss for and click Edit to open the Edit Person window.
3.
In the
Credenal → Card panel, click on the added card to set this card as lost card.
Aer reporng card loss, the access authorizaon of this card will be invalid and inacve. Other
person who gets this card cannot access the doors by swiping this lost card.
4.
Oponal: If the lost card is found, you can click to cancel the loss.
Aer cancelling card loss, the access authorizaon of the person will be valid and acve.
5.
If the lost card is added in one access group and the access group is applied to the device
already,
aer reporng card loss or cancelling card loss, a window will pop up to nofy you to
apply the changes to the device. Aer applying to device, these changes can take eect on the
device.
7.4.8 Set Card Issuing Parameters
The client provides two modes for reading a card's number: via card enrollment
staon or via the
card reader of the access control device. If a card enrollment
staon is available, connect it to the
PC running the client by USB interface or COM, and place the card on the card enrollment to read
the card number. If not, you can also swipe the card on the card reader of the added access control
DS-K3G501X Series Tripod Turnsle
59

HIKVISION DS-K3G501X-R-M-DM55 Specifications

General

Brand	HIKVISION
Model	DS-K3G501X-R-M-DM55
Category	Turnstiles
Language	English