HIKVISION DS-K3G501X-R-M-DM55 - Page 24

●
CANCEL: Return to the level-1 menu, or exit the conguraon
from the level-1 menu
●
OK: Conrm the data, or enter conguraon mode, or enter
the submenu
Note
●
Conguraon data is displayed by two digital tubes.
●
Level-1 Menu: If the decimal point on the right is on, it
indicates the level-1 menu. The number represents the
conguraon item number.
●
Level-2 Menu: if the decimal point in the middle is on, it
indicates the level -2 menu. The number represents the
parameters of a
conguraon item.
Buon Conguraon Procedure
Figure 4-13 Procedure
Steps:
1. Enter the conguraon mode. The number of 1 will show up
on the right side of the screen and the device is ready for
conguraon.
2. Press LEFT and RIGHT to set the conguraon No. Press OK to
enter the level-2 menu and view the parameters. Press
CANCEL, or conduct no operaon for 5 s to cancel
conguraon.
3. Press LEFT and RIGHT to set the parameters at your needs.
Press OK to save the changes or press CANCEL back to
11