Note
●
The face recognion devices are powered via 12 VDC power output interface of the main and
sub lane control board.
●
Barrier open at the entrance: connect to BTN1 and GND.
●
Barrier open at the exit: connect to BTN2 and GND.
4.5 Device Sengs via Buon
You can congure the device via buon on the lane control board.
4.5.1
Conguraon via Buon
Buon Descripon
The buons are on the lane control board.
Figure 4-12 Buon
Exit Buon
●
Single press to open the gate from the entrance posion.
●
Double press to open the gate from the exit posion.
Parameter Conguraon Buon
●
LEFT: Press to add ten to conguraon data
●
RIGHT: Press to add one
conguraon data
●
CANCEL: Return to the level-1 menu, or exit the conguraon from the level-1 menu
●
OK: Conrm the data, or enter conguraon mode, or enter the submenu
DS-K3G501X Series Tripod Turnsle
18