HIKVISION DS-KD8003-IME2 - Page 36

Before You Start
Figure 4-31 Mounng Frame
Note
●
It takes two three-module mounng frames. The dimension of
three-module mounng frame (W × H × D) is: 321 mm × 107
mm × 33 mm.
●
The dimensions above are for reference only. The actual size
can be slightly
dierent from the theorecal dimension.
Steps
1. Paste two Scker 1 onto the wall. Make sure the sckers are
placed horizontally via measuring with the gradienter.
2. Drill 8 holes according to the screw holes on the scker.
Note
●
The suggested size of hole is 6 (diameter) × 25 (depth) mm.
●
The suggested length of cables le outside is 270 mm.
3. Pull out the cable through the cable hole of the le scker.
Figure 4-32 Drill Screw Holes
4.
Remove the sckers and insert the expansion sleeves into the
screw holes.
5. Thread the
module-connecng line (400 mm) and grounding
line across the thread hole of both frames.
26