HIKVISION DS-KD8003-IME2 - Page 80

Press Buon to Call
Steps
1. Go to Intercom → Press Buon to Call to enter the sengs
page.
2. Select Main Unit or Sub Module as the buon call target.
Note
If you select Main Unit, you should congure Buon Sengs
and select Link Time Schedule as Template Plan 1 or Enable
Indoor Staon All Day by Default.
3. Click Save to enable the sengs.
Input and Output
Go to Intercom → I/O Sengs to enter the sengs page.
Figure 7-20 IO Input and Output
Select I/O Input No., Input, I/O Output No. and Output.
Click Save to enable the
sengs.
Note
●
I/O Input supports 4-channel inputs.
Table 7-1 I/O Input
I/O Input No. Input
1 Door Status
2 Disable/Door Status
3 Exit Buon
4 Disable/Exit Buon
●
I/O Output supports 2-channel outputs.
Table 7-2 I/O Output
I/O Output No. Output
1 Electric Lock
2 Disable/Electric Lock
Sub Module Conguraon
70