Network Video Recorder User Manual
116
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the
presence of other network devices on the network and establish functional network
services for data sharing, communications, etc. You can use the UPnP™ function to
enable the fast connection of the device to the WAN via a router without port
mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™
function of the router to which your device is connected. When the network working
mode of the device is set as multi-address, the Default Route of the device should be
in the same network segment as that of the LAN IP address of the router.
Go to Menu > Configuration > Network.
Select NAT to enter the port mapping interface.
UPnP™ Settings Interface
Check checkbox to enable UPnP™.
Select the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are
set by the router automatically.
1) Select Auto in the drop-down list of Mapping Type.
2) Click Apply to save the settings.
3) You can click Refresh to get the latest status of the port mapping.
UPnP™ Settings Finished-Auto
OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port on your
demand by clicking to activate the External Port Settings dialog box.
To Next Page
Loading...
