Network Video Recorder User Manual
117
4) Select Manual in the drop-down list of Mapping Type.
5) Click to activate the External Port Settings dialog box. Configure the
external port No. for server port, http port, RTSP port and https port
respectively.
You can use the default port No., or change it according to actual
requirements.
External Port indicates the port No. for port mapping in the router.
The value of the RTSP port No. should be 554 or between 1024 and 65535,
while the value of the other ports should be between 1 and 65535 and the
value must be different from each other. If multiple devices are configured for
the UPnP™ settings under the same router, the value of the port No. for each
device should be unique.
External Port Settings Dialog Box
6) Click Apply to save the settings.
7) You can click Refresh to get the latest status of the port mapping.
UPnP™ Settings Finished-Manual
Manual Mapping
If your router does not support the UPnP
TM
function, perform the following steps to
map the port manually in an easy way.
Before you start:
Make sure the router support the configuration of internal port and external port in
the interface of Forwarding.
Go to Menu > Configuration > Network.
Select NAT to enter the port mapping interface.
To Next Page
Loading...
