HIKVISION HWN-2100H Series - Page 6

Network Video Recorder User Manual
5
Product Key Features
General
 Connectable to network cameras, network dome and encoders.
 Connectable to the third-party network cameras via HIK, ONVIF, private RTSP
protocols.
 Connectable to the smart IP cameras.
 PAL/NTSC adaptive video inputs.
 Supports H.265+/H.265/ H.264+/H.264 video streams.
 Each channel supports dual-stream.
 Up to 8 network cameras can be connected.
 Independent configuration for each channel, including resolution, frame rate,
bit rate, image quality, etc.
 The quality of the input and output record is configurable.
Local Monitoring
 HDMI
TM
/VGA outputs at up to 1920×1080 resolution.
 Multiple screen display in live view is supported, and the display sequence of
channels is adjustable.
 Live view screen can be switched in group, and manual switch and automatic
cycle live view are also provided, and the interval of automatic cycle can be
adjusted.
 Configurable main stream and sub-stream for the live view.
 Quick setting menu is provided for live view.
 Motion detection, video tampering, VCA (Video Content Analysis) alarm, video
exception alert and video loss alert functions.
 Privacy mask.
 Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
 Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
 1 SATA hard disk can be connected, with a maximum of 6TB storage capacity.
 Supports S.M.A.R.T. and bad sector detection.
 HDD quota management; different capacity can be assigned to different
channel.
Recording and Playback
 Holiday recording schedule configuration.