HIKVISION HWN-2100H Series - Page 7

Network Video Recorder User Manual
6
 Continuous and event video recording parameters.
 Multiple recording types: manual, continuous, alarm, motion, motion | alarm,
motion & alarm.
 8 recording time periods with separated recording types each day.
 Pre-record and post-record for alarm, motion detection for recording, and pre-
record time for schedule and manual recording.
 Searching record files by events (alarm input/motion detection/VCA).
 Playback by sub-periods.
 Tag adding for record files, searching and playing back by tags.
 Locking and unlocking record files.
 Local redundant recording.
 Provides new playback interface with easy and flexible operation.
 Searching and playing back record files by camera No., recording type, start
time, end time, etc.
 Smart search for the selected area in the video.
 Zooming in when playback.
 Reverse playback of multi-channel.
 Supports pause, play reverse, speed up, speed down, skip forward, and skip
backward when playback, and locating by dragging the mouse.
 Supports thumbnails view and fast view during playback.
 Supports playback by transcoded stream.
 Up to 4/8-ch synchronous playback.
Backup
 Export video data by USB or SATA device.
 Export video clips when playback.
 Management and maintenance of backup devices.
Alarm and Exception
 Configurable arming time of alarm input/output.
 Alarm for video loss, motion detection, VCA, video tampering, HDD full, HDD
error, network disconnected, IP confliction, illegal login, abnormal record, and
PoE power overload (for the models supports PoE interfaces only), etc.
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance
center, sending email and alarm output.
 Automatic restore when system is abnormal.