User Manual of Network Camera
121
misinformation. The default level is 50.
Minimum Target Size [0~100]: It refers to the size of the camera identify a
target. You can set the target size according to the actual environment. The
default size is 50.
Target Track: Select ON or OFF to enable or disable the tracking of the
target.
6. Click Edit to set the arming schedule.
7. Select the linkage method by checking the checkbox of notify the surveillance
center.
8. Click Save to save the settings.
Heat Map Statistics
Steps:
1. Click Heat Map Statistics to enter the data statistics interface.
2. Select the report type by clicking the drop-down menu. Daily report, weekly
report, monthly report, and annual report are selectable.
3. Click Counting to export the data.
4. Select Statistics Result as Space Heat Map or Time Heat Map, and the
corresponding heat map will be displayed.
If you select the time heat map to list the statistics, there is an Export button
to export the data in an excel file.
To Next Page
Loading...
