User Manual of Network Camera
122
Figure 6-75 Space Heat Map
Notes:
As shown in the figure above, red color block (255, 0, 0) indicates the most
welcome area, and blue color block (0, 0, 255) indicates the less-popular area.
It is recommended that you do not adjust the electronic lens after the
installation is completed, which may cause the inaccuracy of the data in some
degree.
6.7.4 People Counting
People Counting function helps to calculate the number of people entered or exited a
certain configured area and is widely applied to the entrances or exits.
Notes:
People counting function is supported by some certain iDS camera models.
It is recommended to install the camera vertically to the ground, and thus the
counting function can be more accurate.
People Counting Configuration
To Next Page
Loading...
Need help?
General
