HIKVISION NETWORK CAMERA User Manual

User Manual of Network Camera
135
Figure 7-10 Lite Storage Settings
7.5 Configuring Cloud Storage
Purpose:
The captured pictures can be saved on a NVR which works in the Cloud Storage
mode.
Note: Cloud storage function varies according to different camera models.
Before you start:
Make sure the NVR has been switched into the Cloud Storage working mode, refer to
the User Manual of NVR for details.
Steps:
1. Enter the Cloud Storage interface: Configuration > Advanced Configuration >
Storage > Cloud Storage.
2. Check the checkbox of Enable Cloud Storage.
3. Input the IP address and port of the storage server.
4. Input the user name, password and confirm password for the authentication of the
storage server.
 For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case
letters, numbers and special characters) in order to increase the security of
your product.

HIKVISION NETWORK CAMERA Specifications

General

Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Lens	Fixed or varifocal (depending on model)
Compression	H.265+, H.265, H.264+, H.264
Audio	Built-in microphone and/or audio input/output (depending on model)
Network	Ethernet (RJ-45)
Power Supply	PoE or DC 12V (depending on model)
Weatherproof	IP66 or IP67 (depending on model)
Image Sensor	CMOS (depending on model)
Smart Features	Motion detection, line crossing detection, intrusion detection
Storage	MicroSD card slot (up to 256GB), NAS
Network Interface	10/100 Mbps Ethernet