HIKVISION NETWORK CAMERA User Manual

User Manual of Network Camera
137
Chapter 8 Counting
Purpose:
Counting function is used to calculate the number of object entered or exited a certain
configured area and is widely applied to the entrances or exits.
Notes:
 Counting function is supported by some certain non-iDS camera models.
 Compared with the people counting function supported by the iDS camera, the
counting function of non-iDS camera does not require for calibration settings.
 It is recommended to install the camera vertically to the ground, and thus the
counting function can be more accurate.
Steps ：
 Counting Configuration
1. Enter the Counting Configuration interface:
Configuration > Advanced Configuration > Counting

HIKVISION NETWORK CAMERA Specifications

General

Brand	HIKVISION
Model	NETWORK CAMERA
Category	Security Camera
Language	English