User Manual of Network Camera
149
● Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
3. In the Basic Permission field and Camera Configuration field, you can check
or uncheck the permissions for the new user.
4. Click OK to finish the user addition.
Figure 12-2 Add a User
Modifying a User
Steps:
1. Left-click to select the user from the list and click Modify.
2. Modify the User Name, Level or Password.
3. In the Basic Permission field and Camera Configuration field, you can check or
uncheck the permissions.
4. Click OK to finish the user modification.
To Next Page
Loading...
