EasyManuals Logo

HIKVISION NETWORK CAMERA User Manual

HIKVISION NETWORK CAMERA
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
User Manual of Network Camera
21
Figure 2-13 Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network
camera. Refer to Section 6.3.4 Configuring DDNS Settings for detailed
configuration.
3. Visit the camera via the applied domain name.
Private Domain Name Resolution
Figure 2-14 Private Domain Name Resolution
Steps:
1. Install and run the IP Server software in a computer with a static IP.
2. Access the network camera through the LAN with a web browser or the client
software.
3. Enable DDNS and select IP Server as the protocol type. Refer to Section 6.3.4
Configuring DDNS Settings for detailed configuration.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION NETWORK CAMERA and is the answer not in the manual?

HIKVISION NETWORK CAMERA Specifications

General IconGeneral
Operating Temperature-30 °C to 60 °C (-22 °F to 140 °F)
LensFixed or varifocal (depending on model)
CompressionH.265+, H.265, H.264+, H.264
AudioBuilt-in microphone and/or audio input/output (depending on model)
NetworkEthernet (RJ-45)
Power SupplyPoE or DC 12V (depending on model)
WeatherproofIP66 or IP67 (depending on model)
Image SensorCMOS (depending on model)
Smart FeaturesMotion detection, line crossing detection, intrusion detection
StorageMicroSD card slot (up to 256GB), NAS
Network Interface10/100 Mbps Ethernet

Related product manuals