HIKVISION NETWORK CAMERA User Manual

User Manual of Network Camera
30
Figure 4-9 EAP-TLS
 Identity - Enter the user ID to present to the network.
 Private key password – Enter the password for your user ID.
 EAPOL version - Select the version used (1 or 2) in your access point.
 CA Certificates - Upload a CA certificate to present to the access point for
authentication.
EAP-PEAP:
 User Name - Enter the user name to present to the network
 Password - Enter the password of the network
 PEAP Version - Select the PEAP version used at the access point.
 Label - Select the label used by the access point.
 EAPOL version - Select version (1 or 2) depending on the version used at the
access point
 CA Certificates - Upload a CA certificate to present to the access point for
authentication
 For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters,

HIKVISION NETWORK CAMERA Specifications

General

Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Lens	Fixed or varifocal (depending on model)
Compression	H.265+, H.265, H.264+, H.264
Audio	Built-in microphone and/or audio input/output (depending on model)
Network	Ethernet (RJ-45)
Power Supply	PoE or DC 12V (depending on model)
Weatherproof	IP66 or IP67 (depending on model)
Image Sensor	CMOS (depending on model)
Smart Features	Motion detection, line crossing detection, intrusion detection
Storage	MicroSD card slot (up to 256GB), NAS
Network Interface	10/100 Mbps Ethernet