HIKVISION NETWORK CAMERA User Manual

User Manual of Network Camera
57
Figure 6-18 Dial Parameters
4. View the dial status.
1) Click the Refresh button to view the dial status including real-time mode,
UIM status, signal strength, etc.
2) If Manual is selected as the dial mode, you can also manually connect /
disconnect the wireless network.
Figure 6-19 Dial Status
5. Set the white list.
1) Check the checkbox of Enable SMS Alarm.
The mobile phone number on the white list can receive the alarm message
from the device and reboot the device via SMS.
Note: Up to 8 mobile phone numbers can be added on the white list.
Figure 6-20 White List Settings
2) Select the item on the white list, and click the Edit button to enter the SMS
Alarm Settings interface.

HIKVISION NETWORK CAMERA Specifications

General

Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)
Lens	Fixed or varifocal (depending on model)
Compression	H.265+, H.265, H.264+, H.264
Audio	Built-in microphone and/or audio input/output (depending on model)
Network	Ethernet (RJ-45)
Power Supply	PoE or DC 12V (depending on model)
Weatherproof	IP66 or IP67 (depending on model)
Image Sensor	CMOS (depending on model)
Smart Features	Motion detection, line crossing detection, intrusion detection
Storage	MicroSD card slot (up to 256GB), NAS
Network Interface	10/100 Mbps Ethernet