HIKVISION Ultra Series

Figure 9-10 Customize Audio Content
2.
Set the appellaon.
3.
Enable the funcon.
4.
Set the me duraon when authencaon succeeded.
1) Click Add.
2) Set the
me duraon and the language.
Note
If authencaon is succeeded in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4) Oponal: Repeat substep 1 to 3.
5)
Oponal: Click to delete the congured me duraon.
5.
Set the me duraon when authencaon failed.
1) Click Add.
2) Set the
me duraon and the language.
Note
If authencaon is failed in the congured me duraon, the device will broadcast the
congured content.
Face Recognion Terminal User Manual
107