Hilti TE 70-ATC Original Operating Instructions

134 ﻋﺮﺑﻲ 2244433
*2244433*
◀
ﺍﺣﺮﺹﺃﺛﻨﺎءﺍﺳﺘﺨﺪﺍﻡﺍﻟﺠﻬﺎﺯﻋﻠﻰﺍﺳﺘﻌﻤﺎﻝﻧﻈﺎﺭﺓﻭﺍﻗﻴﺔﻣﻼﺋﻤﺔﻭﺧﻮﺫﺓﺣﻤﺎﻳﺔﻭﻭﺍﻗﻲﻟﻠﺴﻤﻊﻭﻗﻔﺎﺯﻭﺍﻗﻲ
ﻭﻛﻤﺎﻣﺔﺧﻔﻴﻔﺔﻟﻠﺘﻨﻔﺲ.
◀
ﺍﺭﺗﺪﻗﻔﺎﺯﺍﻭﺍﻗﻴﺎﺃﺛﻨﺎءﺗﻐﻴﻴﺮﺍﻷﺩﻭﺍﺕ.ﻣﻼﻣﺴﺔﺃﺩﺍﺓﺍﻟﺸﻐﻞﻗﺪﺗﺆﺩﻱﻟﻮﻗﻮﻉﺇﺻﺎﺑﺎﺕﺑﺠﺮﻭﺡﻗﻄﻌﻴﺔﻭﺇﺻﺎﺑﺔ
ﺑﺤﺮﻭﻕ.
◀
ﺍﺳﺘﺨﺪﻡﻭﺍﻗﻴﺎًﻟﻠﻌﻴﻨﻴﻦ.ﺍﻟﺸﻈﺎﻳﺎﺍﻟﻤﺘﻄﺎﻳﺮﺓﻳﻤﻜﻦﺃﻥﺗﺼﻴﺐﺍﻟﺠﺴﻢﻭﺍﻟﻌﻴﻨﻴﻦ.
◀
ﺍﺣﺮﺹﻗﺒﻞﺑﺪءﺍﻟﻌﻤﻞﻋﻠﻰﻣﻌﺮﻓﺔﻓﺌﺔﺧﻄﺮﺍﻟﻐﺒﺎﺭﺍﻟﻨﺎﺷﺊﻋﻨﺪﺇﺟﺮﺍءﺍﻟﻌﻤﻞ.ﺍﺳﺘﺨﺪﻡﺷﻔﺎﻁﻏﺒﺎﺭﺃﻋﻤﺎﻝ
ﺍﻹﻧﺸﺎءﺍﺕﺫﻱﻓﺌﺔﺣﻤﺎﻳﺔﻣﺼﺮﺡﺑﻬﺎﺭﺳﻤﻴﺎﻭﻣﻄﺎﺑﻖﻟﻠﺘﻌﻠﻴﻤﺎﺕﺍﻟﻤﺤﻠﻴﺔﺍﻟﺨﺎﺻﺔﺑﺎﻟﺤﻤﺎﻳﺔﻣﻦﺍﻟﻐﺒﺎﺭ.ﺍﻟﻐﺒﺎﺭ
ﺍﻟﻨﺎﺗﺞﻋﻦﺧﺎﻣﺎﺕﻣﺜﻞﺍﻟﻄﻼءﺍﻟﻤﺤﺘﻮﻱﻋﻠﻰﺍﻟﺮﺻﺎﺹﻭﺑﻌﺾﺃﻧﻮﺍﻉﺍﻷﺧﺸﺎﺏﻭﺍﻟﺨﺮﺳﺎﻧﺔ/ﺍﻟﺠﺪﺭﺍﻥﻭﺍﻟﺼﺨﻮﺭ
ﺍﻟﻤﺤﺘﻮﻳﺔﻋﻠﻰﺍﻟﻜﻮﺍﺭﺗﺰﻭﺍﻟﻤﻌﺎﺩﻥﺍﻟﺼﺨﺮﻳﺔﻭﺍﻟﻤﻌﺎﺩﻥﻫﻮﻏﺒﺎﺭﺿﺎﺭﺑﺎﻟﺼﺤﺔ.
◀ﺍﺣﺮﺹﻋﻠﻰﻭﺟﻮﺩﺗﻬﻮﻳﺔﺟﻴﺪﺓﻟﻤﻜﺎﻥﺍﻟﻌﻤﻞﻭﺍﺭﺗﺪﻋﻨﺪﺍﻟﻠﺰﻭﻡﻗﻨﺎﻉﺗﻨﻔﺲﻣﺨﺼﺺﻟﻨﻮﻋﻴﺔﺍﻟﻐﺒﺎﺭﺍﻟﻤﻨﺒﻌﺚ.
ﻣﻼﻣﺴﺘﻪﺃﻭﺍﺳﺘﻨﺸﺎﻗﻪﻗﺪﻳﺴﺒﺐﺃﻋﺮﺍﺽﺣﺴﺎﺳﻴﺔﻭ/ﺃﻭﺃﻣﺮﺍﺽﺍﻟﺠﻬﺎﺯﺍﻟﺘﻨﻔﺴﻲﻟﻠﻤﺴﺘﺨﺪﻡﺃﻭﻟﻸﺷﺨﺎﺹ
ﺍﻟﻤﺘﻮﺍﺟﺪﻳﻦﻋﻠﻰﻣﻘﺮﺑﺔﻣﻨﻪ.ﻫﻨﺎﻙﺃﻧﻮﺍﻉﻣﻌﻴﻨﺔﻣﺴﺮﻃﻨﺔﻣﻦﺍﻟﻐﺒﺎﺭﻣﺜﻞﻏﺒﺎﺭﺧﺸﺐﺍﻟﺒﻠﻮﻁﺃﻭﻏﺒﺎﺭﺧﺸﺐ
ﺍﻟﺰﺍﻥ،ﻭﻻﺳﻴﻤﺎﺇﺫﺍﺍﺭﺗﺒﻄﺖﻫﺬﻩﺍﻷﻧﻮﺍﻉﺑﻤﻮﺍﺩﺇﺿﺎﻓﻴﺔﻟﻤﻌﺎﻟﺠﺔﺍﻷﺧﺸﺎﺏ)ﻣﺜﻞﺍﻟﻜﺮﻭﻡﻭﻣﻮﺍﺩﺣﻤﺎﻳﺔ
ﺍﻷﺧﺸﺎﺏ(.ﻻﻳﺠﻮﺯﺍﻟﺘﻌﺎﻣﻞﻣﻊﺍﻟﻤﻮﺍﺩﺍﻟﻤﺤﺘﻮﻳﺔﻋﻠﻰﺍﻷﺳﺒﺴﺘﻮﺱﺇﻻﻣﻦﻗﺒﻞﻓﻨﻴﻴﻦﻣﺘﺨﺼﺼﻴﻦ.
◀
ﺧﺬﻗﺴﻄﺎًﻣﻦﺍﻟﺮﺍﺣﺔﺃﺛﻨﺎءﺍﻟﻌﻤﻞﻭﻗﻢﺑﺘﻤﺎﺭﻳﻦﺍﺳﺘﺮﺧﺎءﻟﺴﺮﻳﺎﻥﺍﻟﺪﻡﻓﻲﺍﻷﺻﺎﺑﻊﺑﺸﻜﻞﺃﻓﻀﻞ.ﻋﻨﺪﺍﻟﻘﻴﺎﻡ
ﺑﺄﻋﻤﺎﻝﻟﻔﺘﺮﺍﺕﻃﻮﻳﻠﺔﻓﻘﺪﻳﺤﺪﺙﺍﺿﻄﺮﺍﺑﺎﺕﻓﻲﺍﻷﻭﻋﻴﺔﺍﻟﺪﻣﻮﻳﺔﺃﻭﺍﻟﺠﻬﺎﺯﺍﻟﻌﺼﺒﻲﺑﺴﺒﺐﻛﺜﺮﺓﺍﻻﻫﺘﺰﺍﺯﺍﺕ
ﻋﻠﻰﺍﻷﺻﺎﺑﻊ،ﺍﻷﻳﺪﻱﺃﻭﻣﻌﺼﻢﺍﻟﻴﺪ.
ﺍﻟﺴﻼﻣﺔﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ
◀
ﻗﺒﻞﺑﺪءﺍﻷﻋﻤﺎﻝﺍﻓﺤﺺﻧﻄﺎﻕﺍﻟﻌﻤﻞﻣﻦﺣﻴﺚﻭﺟﻮﺩﺗﻮﺻﻴﻼﺕﻛﻬﺮﺑﺎءﻣﻐﻄﺎﺓﺃﻭﻣﻮﺍﺳﻴﺮﻟﻠﻐﺎﺯﻭﺍﻟﻤﺎء.ﺍﻷﺟﺰﺍء
ﺍﻟﻤﻌﺪﻧﻴﺔﺍﻟﺨﺎﺭﺟﻴﺔﺑﺎﻟﺠﻬﺎﺯﻳﻤﻜﻦﺃﻥﺗﺘﺴﺒﺐﻓﻲﺻﺪﻣﺔﻛﻬﺮﺑﺎﺋﻴﺔ،ﺇﺫﺍﻗﻤﺖﺩﻭﻥﻗﺼﺪﺑﺈﺗﻼﻑﺇﺣﺪﻯﺗﻮﺻﻴﻼﺕ
ﺍﻟﺘﻴﺎﺭ.
ﺍﻻﺳﺘﺨﺪﺍﻡﻭﺍﻟﺘﻌﺎﻣﻞﺑﻌﻨﺎﻳﺔﻣﻊﺍﻷﺩﻭﺍﺕﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ
◀
ﻗﻢﺑﺈﻳﻘﺎﻑﺍﻷﺩﺍﺓﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔﻋﻠﻰﺍﻟﻔﻮﺭ،ﺑﻤﺠﺮﺩﺗﻌﺮﺽﺍﻷﺩﺍﺓﻟﻺﻋﺎﻗﺔ.ﻳﻤﻜﻦﺃﻥﻳﻨﺤﺮﻑﺍﻟﺠﻬﺎﺯﺟﺎﻧﺒﺎ.
◀
ﻗﺒﻞﺍﻟﺘﺨﺰﻳﻦﺍﻧﺘﻈﺮﺇﻟﻰﺃﻥﺗﺘﻮﻗﻒﺍﻷﺩﺍﺓﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔﺗﻤﺎﻣﺎ.

Hilti TE 70-ATC Specifications

General

Single impact energy	11.5 J
Active Torque Control (ATC)	Yes
Vibration reduction	Yes
Drilling Diameter Range (Hammer Drill Bits)	12 - 40 mm
Chuck Type	TE-Y (SDS Max)
Dust Removal Module Available	Yes
Rated Voltage	230 V
Impact Energy	11.5 J
Power Output	900 W
Voltage	220-240 V
Frequency	50-60 Hz
Tool Holder	TE-Y (SDS Max)
Cord Length	4 m
Drilling Diameter Range (Core Bits)	40 - 150 mm
Working Mode	Hammer drilling, Drilling
Width	126 mm