Need help?Do you have a question about the Hilti TE 70-ATC and is the answer not in the manual?
General| Single impact energy | 11.5 J |
|---|---|
| Active Torque Control (ATC) | Yes |
| Vibration reduction | Yes |
| Drilling Diameter Range (Hammer Drill Bits) | 12 - 40 mm |
| Chuck Type | TE-Y (SDS Max) |
| Dust Removal Module Available | Yes |
| Rated Voltage | 230 V |
| Impact Energy | 11.5 J |
| Power Output | 900 W |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Tool Holder | TE-Y (SDS Max) |
| Cord Length | 4 m |
| Drilling Diameter Range (Core Bits) | 40 - 150 mm |
| Working Mode | Hammer drilling, Drilling |
| Width | 126 mm |
To Next Page
