Hioki PW8001-11 - Page 175

169
Sending Data Using the FTP Client Function
Display screen [SYSTEM] > [COM]
11
1
Tap the [Setup] box under [FTP client]
to open the setting window.
2
Set each item under
[FTP client settings].
3
When the FTP setting is completed, tap
[Test Upload].
See “File upload test” (p. 170).
4
Tap [
×
] to close the setting window.
22
33
44
Conguring FTP client
Parameter Setting Description
Automatic le upload ON or OFF
FTP server Up to 45 one-byte character strings
Example 1: FTPSERVER
Example 2: 192.168.1.1
Sets the host name or IP address of the
FTP server.
Port 1 to 65535 Sets the port number of the FTP server.
Username Up to 32 one-byte character strings
Example: HIOKI
Sets the username for logging on to the
FTP server.
Password Up to 32 one-byte character strings
Example: PW8001
Sets the password for logging on to the
FTP server.
The password is displayed as [●●●●●].
Destination directory Up to 45 one-byte character strings
Example: data
Species the director on the FTP server
for saving data.
Passive mode ON or OFF Allows you to select whether or not to use
the PASV mode during communication.
Delete les after upload ON or OFF Deletes the original le after it is
successfully uploaded.
Filename extension
Serial number
IP address
Time and date
ON or OFF Adds a selected identication name
Connecting with computers
HIOKI PW8001A961-00