Network Load Control
Basic Configuration
Release
6.0
07/2010
8.6
VLANs
163
Figure 44: Assign and save Port VLAN ID, Acceptable Frame Types and
Ingress Filtering
Assign the Port VLAN ID of the related VLANs (2 or 3) to the
individual ports - see table.
Because terminal devices usually do not send data packets with a
tag, you select the admitAll setting for “Acceptable Frame Types”.
The settings for GVRP and Ingress Filter do not affect how this
example functions.
Click “Set” to temporarily save the entry in the configuration.
Select the
Basics: Load/Save dialog.
In the “Save” frame, select “To Device” for the location and click
“Save” to permanently save the configuration in the active
configuration.
To Next Page
Loading...
Need help?
General
