EasyManuals Logo

Hirschmann PowerMICE Reference Manual

Hirschmann PowerMICE
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Routing Commands 25
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
4.2.10 show ip interface brief
This command displays summary information about IP configuration settings for all ports in the router.
This command takes no options.
Format show ip interface brief
Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes.
IP Address The IP address of the routing interface in 32-bit dotted decimal format.
IP Mask The IP mask of the routing interface in 32-bit dotted decimal format.
Netdir Bcast Indicates if IP forwards net-directed broadcasts on this interface. Possible values are
Enable or Disable.
MultiCast Fwd Indicates the multicast forwarding administrative mode on the interface. Possible
values are Enable or Disable.
4.2.11 show ip route
This command displays the entire route table. This commands takes no options.
Format show ip route
Mode Privileged EXEC
Network Address Is an IP address identifying the network on the specified interface.
Subnet Mask Is a mask of the network and host portion of the IP address for the router interface.
Protocol Tells which protocol added the specified route. The possibilities are: local, static,
OSPF or RIP.
Total Number of Routes The total number of routes.
For each Next Hop
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next destination.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination.
4.2.12 show ip route bestroutes
This command causes the entire route table to be displayed. This commands takes no options.
Format show ip route bestroutes
Mode Privileged EXEC
Network Address Is an IP route prefix for the destination.
Subnet Mask Is a mask of the network and host portion of the IP address for the specified interface.
Protocol Tells which protocol added the specified route. The possibilities are: local, static,
OSPF or RIP.
Total Number of Routes The total number of routes in the route table.
For each Next Hop
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next destination.

Other manuals for Hirschmann PowerMICE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann PowerMICE and is the answer not in the manual?

Hirschmann PowerMICE Specifications

General IconGeneral
BrandHirschmann
ModelPowerMICE
CategoryNetwork Router
LanguageEnglish

Related product manuals