EasyManuals Logo

Hirschmann PowerMICE Reference Manual

Hirschmann PowerMICE
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Routing Commands 29
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
Format no ip irdp preference
Mode Interface Config
4.3.7 show ip irdp
This command displays the router discovery information for all interfaces, or a specified interface.
Format show ip irdp {<slot/port> | all}
Modes Privileged EXEC
User EXEC
Ad Mode Displays the advertise mode which indicates whether router discovery is enabled or
disabled on this interface.
Max Int Displays the maximum advertise interval which is the maximum time allowed
between sending router advertisements from the interface in seconds.
Min Int Displays the minimum advertise interval which is the minimum time allowed
between sending router advertisements from the interface in seconds.
Adv Life Displays advertise lifetime which is the value of the lifetime field of the router adver-
tisement sent from the interface in seconds.
Preferences Displays the preference of the address as a default router address, relative to other
router addresses on the same subnet.
4.4 Virtual LAN Routing Commands
This chapter provides a detailed explanation of the Virtual LAN Routing commands. The commands are
divided by functionality into the following different groups:
z Show commands are used to display switch settings, statistics and other information.
z Configuration Commands are used to configure features and options of the switch. For every con-
figuration command there is a show command that will display the configuration setting.
z Copy commands are used to transfer configuration and informational files to and from the switch.
4.4.1 vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4042.
Format vlan routing <vlanid>
Mode VLAN Database
4.4.1.1 no vlan routing
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4042.
Format no vlan routing <vlanid>
Mode VLAN Database
4.4.2 show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format show ip vlan

Other manuals for Hirschmann PowerMICE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann PowerMICE and is the answer not in the manual?

Hirschmann PowerMICE Specifications

General IconGeneral
BrandHirschmann
ModelPowerMICE
CategoryNetwork Router
LanguageEnglish

Related product manuals