Routing Commands 26
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination. The next router will always be one
of the adjacent neighbors or the IP address of the local interface for a directly attached
network.
4.2.13 show ip route entry
This command displays the entire route table.
Format show ip route entry
Mode Privileged EXEC
Network Address Is a valid network address identifying the network on the specified interface.
Subnet Mask Is a mask of the network and host portion of the IP address for the attached network.
Protocol Tells which protocol added the specified route. The possibilities are: local, static,
OSPF or RIP.
For each Next Hop
Next Hop Interface The outgoing router interface to use when forwarding traffic to the next desti-
nation.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination.
Metric The cost associated with this route.
Preference The administrative distance associated with this route.
4.2.14 show ip route preferences
This command displays detailed information about the route preferences. Route preferences are used in
determining the best route. Lower router preference values are preferred over higher router preference
values.
Format show ip route preferences
Modes Privileged EXEC
User EXEC
Local This field displays the local route preference value.
Static This field displays the static route preference value.
OSPF Intra This field displays the OSPF Intra route preference value.
OSPF Inter This field displays the OSPF Inter route preference value.
OSPF Type-1 This field displays the OSPF Type-1 route preference value.
OSPF Type-2 This field displays the OSPF Type-2 route preference value.
RIP This field displays the RIP route preference value.
4.2.15 show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about the
fields that are displayed.
Format show ip stats
Modes Privileged EXEC