Routing Commands 32
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
authorization type is simple text password. The parameter <vrID> is the virtual router ID which has an
integer value ranges from 1 to 255.
Default no authorization
Format ip vrrp <vrID> authentication {none | simple <key>}
Mode Interface Config
4.5.6.1 no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured on a
specified interface.
Format no ip vrrp <vrID> authentication
Mode Interface Config
4.5.7 ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a specified interface.
The parameter
<vrID> is the virtual router ID which has an integer value range from 1 to 255
Default enabled
Format ip vrrp <vrID> preempt
Mode Interface Config
4.5.7.1 no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured on a specified
interface.
Format no ip vrrp <vrID> preempt
Mode Interface Config
4.5.8 ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface. The
priority of the interface is a priority integer from 1 to 254. The parameter
<vrID> is the virtual router ID
which has an integer value ranges from 1 to 255.
Default 100
Format ip vrrp <vrID> priority <1-254>
Mode Interface Config
4.5.8.1 no ip vrrp priority
This command sets the default priority value for the virtual router configured on a specified interface.
Format no ip vrrp <vrID> priority
Mode Interface Config
4.5.9 ip vrrp timers advertise
This command sets the virtual router advertisement value for an interface. The value for advinterval is
time used for VRRP advertisement in seconds. The parameter <vrID> is the virtual router ID which has
an integer value range from 1 to 255.