Routing Commands 33
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
Default 1
Format ip vrrp <vrID> timers advertise <1-255>
Mode Interface Config
4.5.9.1 no ip vrrp timers advertise
This command sets the default virtual router advertisement value for an interface.
Format no ip vrrp <vrID> timers advertise
Mode Interface Config
4.5.10 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the switch.
Format show ip vrrp interface stats <slot/port> <vrID>
Modes Privileged EXEC
User EXEC
Uptime The time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol Represents the protocol configured on the interface.
State Transitioned to Master Represents the total number of times virtual router state has changed
to MASTER.
Advertisement Received Represents the total number of VRRP advertisements received by this
virtual router.
Advertisement Interval Errors Represents the total number of VRRP advertisements received
for which advertisement interval is different than the configured value for this virtual
router.
Authentication Failure Represents the total number of VRRP packets received that don't pass the
authentication check.
IP TTL errors Represents the total number of VRRP packets received by the virtual router with IP
TTL (time to live) not equal to 255.
Zero Priority Packets Received Represents the total number of VRRP packets received by virtual
router with a priority of '0'.
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the virtual router
with a priority of '0'.
Invalid Type Packets Received Represents the total number of VRRP packets received by the vir-
tual router with invalid 'type' field.
Address List Errors Represents the total number of VRRP packets received for which address list
does not match the locally configured list for the virtual router.
Invalid Authentication Type Represents the total number of VRRP packets received with
unknown authentication type.
Authentication Type Mismatch Represents the total number of VRRP advertisements received
for which 'auth type' not equal to locally configured one for this virtual router.
Packet Length Errors Represents the total number of VRRP packets received with packet length
less than length of VRRP header.