53
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
Format show interfaces cos-queue [slot/port]
Mode Privileged EXEC
Interface This displays the slot/port of the interface. If displaying the global configuration, this
line is replaced by a Global Configuration indication.
Intf Shaping Rate The maximum transmission bandwidth limit for the interface as a whole. It is
independent of any per-queue maximum bandwidth value(s) in effect for the inter-
face. This is a configured value.
The following information is repeated for each queue on the interface.
Queue Id An interface supports 8 queues numbered 0 to 7.
Minimum Bandwidth The minimum transmission bandwidth guarantee for the queue, expressed
as a percentage. A value of 0 means bandwidth is not guaranteed and the queue oper-
ates using best-effort. This is a configured value.
Maximum Bandwidth The maximum transmission bandwidth limit for the queue, expressed as a
percentage. A value of 0 means no upper limit is enforced, so the queue may use any
or all of the available bandwidth of the interface. This is a configured value.
Scheduler Type Indicates whether this queue is scheduled for transmission using a strict priority or
a weighted scheme. This is a configured value.
To Next Page
Loading...
