Hirschmann SPIDER PL - 2 Configuration Interface; USB Interface

Installation SPIDER PL
Release 08 09/2018
25
2 Configuration interface
2.1 USB interface
The USB interface allows you to connect a storage medium. This is for
transferring configuration data.
The USB interface has the following properties:
 Connectors: type A
 Supports the USB master mode
 Supports USB 2.0
 Supplies current of max. 500 mA
 Voltage not potential-separated
1
2
3
4
Pin
1
2
3
4
Function
VCC (VBus)
- Data
+ Data
Ground (GND)