Hirschmann SPIDER PL - Configuration Readout

Installation SPIDER PL
Release 08 09/2018
39
5.1 Configuration readout
You can read out the configuration using a storage medium.
Proceed as follows:
 Create a text file in the root directory of the storage medium.
 Rename the text file to “ShowRunningConfiguration.txt”.
 Connect the storage medium to the device.
 Restart the device by disconnecting the power supply for a moment.
 When the text file “ShowRunningConfiguration.txt” in the root directory
of the device is found, the device creates a file with the current
configuration.
 You find this file in the root directory of the storage medium under the
name “RunningConfig.txt”.