44
Installation SPIDER PL
Release
08
09/2018
Device variants SPIDER PL-20-16T1... , SPIDER PL-20-
24T1... , SPIDER PL-30-24T1...
To prepare the deinstallation, you proceed as follows:
Disconnect the data cables.
Disable the supply voltage.
Disconnect the terminal blocks.
Disconnect the grounding.
To remove the device from the DIN rail, you proceed as follows:
Press the device downwards and pull it out from under the DIN rail.
WARNING
ELECTRIC SHOCK
Disconnect the grounding only after disconnecting all other cables.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
To Next Page
Loading...
