Attention
1、When replace the rubber set of the ball , must
enter 1/2 volumein lithium grease in to the rubber.
2、When replace the direction machien,cleaning all
the parts,and daub the lithium grease in to the
movement.
4.1.1.3Reinstalls the steering system parts
1. Connecting the direction machine with four pieces bolt M10
×30 on the frame,then use tow pieces of locknut to connect the
direction machine ball and the rod.(Attached figure4-1-12-1)
figure4-1-12-2
Attention:continue to ues
the hidden danger Ball
pin may causes the serious
accident or the death.
To Next Page
Loading...
