Attached figure4-1-12-1 figure4-1-12-2
1.
direction machine
1.
tension rod
2.
set bolt
2.
locknut
3.
Direction machine ball
M10*30Bolt tight of force,40N.m
M10Nut tight of force,36N.m
2. Connecting the steering transmission shaft and
direction machine with one piece of flange boltM8 ×
20.(Attached figure4-1-13)
Attached figure4-1-13
1. direction machine
2. Hexagon flange nutM8×20
3. steering transmission shaft
M8*20 Bolt tight of force,32N.m
3. Connecting the steering transmission shaft and steering
column tube with one piece of flange boltM8×20,then use
To Next Page
Loading...
