Why does the Hitachi Projector image look pale?
If the color of the image from your Hitachi Projector looks pale, the input signal type (RGB-S/COMPONENT2) might not have been connected properly. Check to make sure that the connections between the projector and the input device are correct.
Why are the colors wrong on my Hitachi CP-WU13K?
If the colors of the projected image from your Hitachi Projector are out of place, for example, displaying red as blue, the G/Y, R/Pr, B/Pb cables from the input might have been incorrectly connected. Please make sure the input source has been correctly connected to the projector.
Why is the Hitachi CP-WU13K cooling fan so loud?
If the noise from the cooling fan of your Hitachi Projector suddenly becomes louder, it may indicate that the temperature inside the projector has risen. The cooling fan will operate at a higher speed to discharge the internal heat more rapidly.
General| Resolution | WUXGA (1920 x 1200) |
|---|---|
| Light Source | Lamp |
| Throw Ratio | 0.8 - 8.0:1 (depending on lens) |
| Display Type | 3LCD |
| Lamp Life | 2000 hours (Normal Mode), 3000 hours (Eco Mode) |
| Brightness | 13, 000 lumens |
| Lens Shift | Vertical: ±60%, Horizontal: ±30% (depending on lens) |
| Projection Size | 600 inch |
| Input Connectors | HDMI, DVI-D, VGA, BNC, S-Video |
| Lamp Type | UHP |
Covers power, shock, overload, cleaning, and environmental hazards.
Covers ventilation, filter, foreign objects, carrying, and servicing.
Covers orientation, power, focus, zoom, and keystone correction.
Discusses throw distance, installation types, and device connections.
Detailed configuration of input sources and related options.
Detailed configuration of image parameters like contrast, brightness, etc.
Detailed configuration of zoom, PIP, and aspect ratio.
Detailed configuration for lamp modes and status.
Guide to resolving projector issues based on symptoms.
To Next Page
