Hitachi G200 - Page 193

• Settings on page B-43
• Primary Volume Selection on page B-43
• Secondary Volume Selection on page B-46
•
Mirror Selection on page B-46
•
Options on page B-47
• Selected Pairs table on page B-47
Settings
Item Description
Remote Storage System Selections in the remote system.
• Model / Serial Number: Model and serial number.
Note: VSP Gx00 is displayed for VSP Gx00 models and
VSP Fx00 models.
• Path Group ID: Select the ID of the path group.
Primary Volume Selection
Item Description
Use Existing Volumes of UR
Pairs
Displayed only for UR pairs.
Select whether to use the volume which is being used by
the UR pair.
• Yes: Creates a pair using the volume used by the UR
pair. Select Yes to create a pair in a 3DC multi-target or
cascade configuration with three UR sites.
• No: Creates a pair without using the volume used by
the UR pair. Select No not to create a pair in a 3DC
multi-target or cascade configuration with three UR
sites.
Selection Object Select the port type in the local storage system.
• Fibre: Select when specifying LU for Fibre port.
• iSCSI: Select when specifying LU for iSCSI port.
• NAS Platform (User LU): Select when specifying LU for
NAS port. Displayed only when NAS modules are
installed. This option is not displayed for VSP G200.
Ports without LUs cannot be selected. If only one port type
(Fibre, iSCSI, or NAS Platform) has an LU, the port type is
selected automatically.
LU Selection TC and UR only.
• Port ID: Local system's port identifier.
• Host Group Name: Host group name. Displays only
when Fibre port is selected in Port Name.
• iSCSI Target Alias: Selections for iSCSI target alias. All
the LUNs in the indicated port for Available LDEVs if
Any is selected. Displays when iSCSI port is selected
for Port Name.
TC GUI reference
B-43
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models