Hitachi HF-W100E/IoT - CHAPTER 1 INTRODUCTION to HF-W100 E;Iot; Overview

1. INTRODUCTION TO HF-W100E/IoT
1-1
CHAPTER 1 INTRODUCTION TO HF-W100E/IoT
1.1 Overview
The HF-W100E/IoT is a Hitachi industrial computer HF-W100E equipped with a software
PLC. It has the features of both an industrial computer and a programmable logic controller
(PLC).
A software PLC is a development environment/runtime environment that executes PLC
functions on a computer with a general-purpose OS. HF-W100E/IoT uses CODESYS®, a
software PLC developed by 3S-Smart Software Solutions GmbH, Germany (hereinafter
denoted as 3S).
 About CODESYS
CODESYS is a software PLC developed by 3S. It consists of a development environment
that supports programming languages defined in the international standard IEC 61131-3
and a realtime execution environment (runtime environment) that runs control applications
developed by the development environment.
In HF-W100E/IoT, the following CODESYS packages are pre-installed. (You can
download the development environment from the Web site of 3S, but note that only the
following version is verified to work with the HF-W100E/IoT.)
• Development environment: CODESYS Development System (V3.5 SP10 Patch 1)
• Runtime environment: CODESYS Control Softmotion RTE (V3.5 SP10 Patch 1)
 Using CODESYS
For information about the instructions on how to use CODESYS not described in this
manual, refer to the online help for the development environment. You can start the online
help on the help menu in CODESYS.
In addition to the online help, CODESYS original manuals (PDF format in English) from
3S are available and stored in the following locations. Refer to them when needed.
Note that Adobe® Reader® from Adobe Systems Incorporated is required to read a PDF
file.
No.
File name
Storage folder
Description
1
CODESYS Installation and
Start.pdf
C:\Program Files (x86)\3S CODESYS
\CODESYS\Documentation
Creating a project, executing a task,
and debugging in the CODESYS
development environment
2
CODESYSControlRTEV3_
Manual.pdf
C:\Program Files\3S CODESYS
\CODESYS Control RTE3\Documentation
Mechanism and the settings of the
CODESYS runtime environment
3
CoDeSys_OPC_Server_V3
_User_Guide.pdf
C:\Program Files (x86)\3S CODESYS
\CODESYS OPC Server 3
Instructions for using OPC Config,
which is a configuration tool for the
OPC server and for the
communication interface between
the CODESYS development
environment and the PLC.
4
AeConfigurator_UserGuide
.pdf
Instructions for using
AeConfigurator, which is a tool for
adding and setting up alarm events
when you use OPC AE.
5
WebServerSSL_en.pdf
C:\Program Files (x86)\3S CODESYS
\GatewayPLC\Documentation
Procedure for deploying
WebServer with safe connections
when Web Visualization is used.