Hitachi HF-W100E/IoT - Specifications; Software Specifications

1. INTRODUCTION TO HF-W100E/IoT
1-2
1.2 Specifications
The instruction manual of the HF-W100E, base hardware of HF-W100E/IoT, (hereinafter
denoted as HF-W instruction manual) describes the specifications of the industrial computer,
and this section supplements them with HF-W100E/IoT-specific specifications.
1.2.1 Software specifications
This manual describes the software specifications only. The hardware specifications are the
same as those of the HF-W100E. For details about the hardware specifications, refer to “5.1
Equipment Specifications” in the HF-W instruction manual.
Item
Specifications
Motion model
CNC model
Model
HJ-100E-PAMM
HJ-100E-PGMM
HJ-100E-PBMM
HJ-100E-PHMM
Pre-installed OS
See “(1)Pre-installed OS”
Development environment
CODESYS® Development System (V3.5 SP10 Patch1)
Programming languages
IEC 61131-3 standard programming languages
• LD: Ladder diagram
• FBD: Function block diagram (including CFC)
• SFC: Sequential function chart
• ST: Structured text
Runtime environment
CODESYS® Control SoftMotion RTE (V3.5 SP10 Patch1)
I/O control
Software PLC
Motion control
SoftMotion
(PLCopen® compliant)
SoftMotion (PLCopen®
compliant)
CNC (G-code)
Field network
EtherCAT® master
Data exchange standard
OPC server
HMI features
Visualization features
(1) Pre-installed OS
HJ-100E-PAMM
Microsoft® Windows® 10 IoT Emterprise 2016 LTSB (64bit)
HJ-100E-PBMM
Microsoft® Windows® 10 IoT Emterprise 2016 LTSB (64bit)
HJ-100E-PGMM
Microsoft® Windows® Embedded Standard 7 SP1 (64bit)
HJ-100E-PHMM
Microsoft® Windows® Embedded Standard 7 SP1 (64bit)