Hitachi HF-W100E/IoT - Chapter 2 Setup; Setup Items

2. SETUP
2-1
CHAPTER 2 SETUP
This chapter describes how to set up the HF-W100E/IoT.
• After setting up the OS, activate the license of the CODESYS runtime environment.
However, since devices shipped after September 2018 will be automatically licensed, it is not
necessary to perform the activation process. Please check to "2.2.1 Confirmation of Activation
Status" to see if license activation is being done.
• The CODESYS development environment and the runtime environment are pre-installed. You do
not have to install or set them up.
2.1 Setup Items
Refer to “CHAPTER 3 SETUP” in the HF-W100E
INSTRUCTION
MANUAL (manual number WIN-62-
006
9).
Activate the license of the CODESYS
runtime
environment as described in
“2.2 License Activation”.
OS setup
License activation