Hitachi VSP F1500

supported on the VSP G1000 storage system, VSP G1500, VSP F1500, VSP
Gx00 models, and VSP Fx00 models.
• HORCM_CMD
Specify a volume belonging to meta_resource or a virtual storage
machine in the storage system as the command device. CCI obtains the
virtual storage machine information defined in the storage system via the
specified command device, and configures the virtual storage machine
components.
When you specify a volume that belongs to a virtual storage machine,
note the following:
¢
Use the serial number of the virtual storage machine and the virtual
LDEV ID for the serial number and LDEV ID which you are specifying
for HORCM_CMD.
¢
You cannot specify HORCM_VCMD to the same configuration definition
file.
¢
You cannot define the volume that does not belong to the virtual
storage machine to the HORCM_CMD of the same configuration
definition file.
¢
When you specify multiple volumes of virtual storage machines
associated with the same serial number, these volumes must belong
to the same storage system.
Note: The mkconf command lets you create the configuration definition
file by importing the special file name from the standard input. When you
create a configuration definition file by using the mkconf command, make
sure that the special file name of the volume that belongs to the virtual
storage machine and the special file name of the volume that does not
belong to the virtual storage machine are different.
• HORCM_VCMD
In HORCM_VCMD, specify the serial number of the virtual storage
machine to be operated by this instance.
You cannot operate the virtual storage machines whose serial numbers
are not specified in HORCM_VCMD. To operate more than one virtual
storage machine from a instance, specify each serial number of the virtual
storage machines in a new line with HORCM_VCMD. To operate the virtual
storage machine specified in the second or later of HORCM_VCMD, use
the command options (for example, -s <seq#> or -u <unit id>). If you
omit the options of the command, the virtual storage machine of which
you first specified serial number is operated. Even if you specify the
virtual storage machine of which the serial number is not specified in
HORCM_VCMD with the command option (-s <seq#> or -u <Unit ID>),
the error (EX_ENOUNT) occurs.
• HORCM_LDEV
Specify volumes to be copied. Serial numbers of the virtual storage
machine and virtual LDEV IDs must be specified. You cannot specify the
volumes with HORCM_DEV in the system configuration with the global
storage virtualization function. Specify the volumes with HORCM_LDEV.
• HORCM_INST
3-56
CCI functions
Command Control Interface User and Reference Guide