Hitachi VSP F1500

Step Description Command
4 Unlock the resource group.
raidcom unlock resource -resource_name
<resource group name>
5 Display the resource group
information to confirm the
operations and lock information.
raidcom get resource
6 Log out.
raidcom -logout
Resource group operations
Creating resource groups
To create resource groups, perform the following provisioning operations.
Step Operation Description Command
1 Creating
resource
groups
Creates resource groups.
raidcom add resource
-resource_name <resource
group name>
2 Allocationg
resources to
resource
groups
Specifies resources that are
allocated to meta_resource
(resource group), and
allocates resources to
created resource groups.
raidcom add resource
-resource_name <resource
group name> [-ldev_id
<ldev#> | -port <port#> |
-port <port#> <host group
name> | -parity_grp_id
<gno-sgno> |
-external_grp_id
<gno-sgno>]
3 Displaying a
resource group
information
Displays a resource group
information, and confirms
execution results of
commands.
raidcom get resource
Deleting resource groups
To delete resource groups, perform the following provisioning operations.
Step Operation Description Command
1 Deleting
resources that
are allocated to
resource
groups.
Deletes resources that are
allocated to resource
groups. In other words, this
operation allocates
resources to resource
group: meta_resource.
raidcom delete resource
-resource_name <resource
group name> [-ldev_id
<ldev#> | -port <port#> |
-port <port#> <host group
name> | -parity_grp_id
<gno-sgno> |
-external_grp_id
<gno-sgno>]
2 Confirming
resource
deletions
Confirms that resources are
not allocated to resource
groups that you want to
delete. At that time,
raidcom get resource
5-16
Provisioning operations with CCI
Command Control Interface User and Reference Guide