Hitachi VSP F1500

Step
Operation
overview
Description Executed command
8 Creating LDEV
(V-VOL)
Specifies the pool and creates
LDEV (V-VOL).
raidcom add ldev -pool
{<pool ID#> | <pool
naming> | snap} -ldev_id
<ldev#> {-capacity <size>
| -offset_capacity <size>
| -cylinder <size>}
[-emulation <emulation
type>][-location <lba>]
[-mp_blade_id <mp#>]
9 Creating LDEV
(V-VOL)
nicknames
(arbitrarily)
Creates LDEV (V-VOL)
nicknames. This operation is
optional.
raidcom modify ldev
-ldev_id <ldev#>
-ldev_name <ldev naming>
10 Configuring MP
blades of
LDEVs (V-VOL)
Configures MP blades of
created LDEVs (V-VOL).
raidcom modify ldev
-ldev_id
<ldev#> -mp_blade_id
<mp#>
11 Displaying a
LDEV (V-VOL)
information
Displays an information of
created LDEV (V-VOL), and
confirms an execution result of
the command.
raidcom get ldev -ldev_id
<ldev#> [-cnt <count>]
[-key <keyword>]
Script examples
The following shows the script examples of virtual volume (Dynamic
Provisioning for mainframe) operation.
5-34
Provisioning operations with CCI
Command Control Interface User and Reference Guide