Hitachi VSP F1500

Function Command syntax
Deleting the external path raidcom delete path -path_grp <path group#> -port <port#> -
external_wwn <wwn strings>
Releasing the mapping of external
volume
raidcom delete external_grp -external_grp_id <gno-sgno> [-
forcible]
Stopping the use of paths to the
external volume
raidcom disconnect path -path_grp <path group#> -port <port#>
-external_wwn <wwn strings>
Creating a parity group raidcom add parity_grp {-parity_grp_id <gno-sgno> | -
concatenated_parity_grp_id <gno-sgno>... } -drive_location
<drive location>... -raid_type <raid type> [-encryption {enable|
disable}] [-copy_back {enable|disable}] [-
accelerated_compression {enable| disable}] [-clpr <clpr#>]
Deleting a parity group raidcom delete parity_grp -parity_grp_id <gno-sgno>
Setting a spare drive or cancelling
the setting
raidcom modify drive -drive_location <drive location> -spare
{enable |disable}
Help on configuration setting commands
To see the configuration setting command help, execute any command using
the -h option, for example, raidcom - h.
raidcom -h
LDEV nickname function
As a function of configuration setting command, a nickname can be set for
each LDEV.
The details of the definition for the LDEV nickname function are shown below.
The maximum length of a name is 32 characters. For one LDEV, one
nickname can be defined.
A nickname can be defined as follows:
raidcom modify ldev -ldev_id <ldev#> -ldev_name <ldev naming>
Available provisioning operations
The following provisioning operations can be performed using CCI.
Operation type Description Corresponding command
Login and logout Log in. raidcom -login <user_name> <password>
Log out. raidcom -logout
Resource Lock resource. raidcom lock resource -resource_name <resource
group name > [-time <time(sec)>]
5-6
Provisioning operations with CCI
Command Control Interface User and Reference Guide